Antenna CB PNI ML160, length 155 cm, 26-30MHz, magnet 145 mm included

Antenna CB with magnetic base.

€29.09

Availability: Out of stock

SKU

PNI-ML160

	performances The performance of the PNI ML160 product is closely related to the technical characteristics that the antenna has in ideal conditions of installation and use: SWR <= 1.1, Maximum applied power 600 W, impedance 50 Ohms, Stainless steel, etc.
Communication distance The communication distance is another decisive factor in the purchase and use of a CB antenna. Thus, the maximum communication distance of 15 km or even more is achieved under ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance.
	Length The length of the PNI ML160 antenna is another very important factor that can influence the communication distance in traffic. Thus, the longer the antenna, the greater the communication distance / range.
Full package This antenna is ready for assembly with: antenna, magnetic base, Allen key for calibration. All you have to do is mount the magnetic base, connect it to a CB radio station and calibrate it to use it at maximum performance.
	Magnetic base The magnetic base in this package is provided with a 4 m cable, enough for placing the antenna on the dome, and a diameter of 145 mm with a strong magnet that gives the antenna stability even at very high speeds.

Video presentation
The CB PNI ML160 Antenna

Product identification
Work tape	? B
Product color (spike)	Silver
General characteristics
Working frequency	25 - 30 MHz
Number of channels	90
Minimum SWR in the center of the band	1.0
Length	155 cm (including base)
Impedance	50 Ohms
Material	Stainless steel
Connector type
I earn	1 - 2 dBi
Polarization	vertically
Working distance	15 km
Magnetic base	145 mm
The package contains
Radio station antenna	Yes
RG58 cable	4 m
Plug PL259	Yes
Magnetic base	145 mm