Voltage stabilizer with relay PNI AVR M1000VA, 2.7A, 600W, 1000VA

No voltage fluctuations

The PNI AVR M1000VA 600W relay voltage stabilizer has been designed to keep the output voltage as stable as possible. When the mains voltage fluctuates, the PNI AVR M1000VA will automatically adjust the output voltage to the normal value.

Depending on their capacity, PNI stabilizers have a wide range of applications: electronic equipment, household appliances, air conditioners, power tools, refrigerators and in general, electronics that need stable voltage.

How does it work?

When the unit measuring the input voltage detects a variation outside the preset range, it will send a signal to the control unit. This will engage/disengage the relays connected to the secondary voltage transformer to compensate for variations and for a more precise control of the output voltage within the preset range.

The copper coil is the basic component of the voltage stabilizer. PNI AVR M1000VA 600W Relay Voltage Stabilizer uses high quality pure copper. Thus, the coil has a longer life and greater efficiency.

Maximum load supported

The maximum load supported by the PNI AVR M1000VA voltage stabilizer is 600W 2.6A.

The stabilizer's 600W 2.6A capacity allows connecting household appliances including TVs, printers, fans and more.

Attention: do not connect consumers with loads that exceed the power of the stabilizer. For example, motor/compressor electronics can have 2-6 times the claimed power at startup. Choose the stabilizer with this aspect in mind.

Essential functions

In the nominal voltage range ±25% 50/60Hz, the PNI stabilizer provides 100% output power. Outside this range, output power should be as per the attached chart.

Important Features:

• output delay (time-delay) - 6 or 180 seconds;
• automatic overvoltage and undervoltage protection (180V - 250V);
• overload/overtemperature protection;
• automatic adaptation to the input frequency (50 / 60 Hz).