MC4Ya

Set splice connector PNI MC4 Y mama-father for solar cable 4-6 mm

Conectoralu1

PNI connector for aluminum profile for photovoltaic panel mounting kit

Roof mounting kit PNI board for 2 photovoltaic panels

The fasteners are configured for the assembly of two in-line panels. The mounting structure includes all the materials and accessories required for sheet metal inclined roofs. 250W photovoltaic modules with dimensions 990mm x 38mm x 1640mm are the standard panels for this mounting structure. This mounting structure is guaranteed for snow loads of up to 2 meters and winds up to 130 kmh. Photovoltaic panels can also be mounted in a vertical position, but the amount and length of the aluminum profile must be recalculated. The kit contains: 2 x 2.1 ml aluminum profile 40 x 40 mm 4 x Stainless Steel Shelf Supports 4 x Mounting system adapter plate 4 x Screws M10 x 25mm 4 x M10 nuts with locking system 2 x Aluminum middle clamps 4 x Aluminum end clamps 6 x Threaded nuts with nut M8 6 Allen screws M8 x 45mm
€81.75
Availability: Out of stock
SKU
PNI-KMSOL02

image description

PNI sheet roof mounting kit for 2 photovoltaic panels

The fixing elements are configured for mounting two panels in line.

The mounting structure includes all the necessary materials and accessories for pitched roofs covered with sheet metal.

The 250W photovoltaic modules with the dimensions of 990mm x 38mm x 1640mm are the standard panels for this mounting structure. This mounting structure is guaranteed for snow loads of up to 2 meters and wind with an intensity of up to 130 kmh.

Photovoltaic panels can also be mounted in a vertical position, but the quantity and length of the aluminum profile must be recalculated.

The kit contains:

2 x 2.1 ml aluminum profile 40 x 40mm

4 x Stainless steel supports for tin roof

4 x mounting system adapter plate

4 x M10 x 25mm screws

4 x M10 Nuts with locking system

2 x Aluminum Middle Clamps

4 x Aluminum End Clamps

6 x Profile Nuts for M8 Threaded Nut 6 M8 x 45mm Allen Screws

Write Your Own Review
You're reviewing:Roof mounting kit PNI board for 2 photovoltaic panels
Your Rating
Identification
Product code PNI-KMSOL02
Producer PNI
General characteristics
Description - Mounting system for 2 photovoltaic panels of 250W on a sloping roof. The fixing elements are configured for mounting two panels in line. - The assembly structure includes all the materials and accessories necessary for pitched roofs covered with tin. - Compatibility with 250W photovoltaic panels with the dimensions of 990mm x 38mm x 1640mm standard for this mounting structure. - This assembly structure is guaranteed for snow loads of up to 2 meters and wind with an intensity of up to 130 kmh.
The package contains
Content 2 x 2.1 ml aluminum profile 40 x 40mm 4 x Stainless steel supports for tin roof 4 x Mounting system adapter plate 4 x M10 x 25mm screws 4 x M10 nuts with locking system 2 x Aluminum middle clamps 4 x Aluminum End Clamps 6 x Profile Nuts for M8 Threaded Nut 6 M8 x 45mm Allen Screws