PNI IP840 PTZ wireless video surveillance camera package, 8MP 4K with photovoltaic solar panel, 60W power with 20A battery, 12V output

Rechargeable battery and solar panel

The PNI PSF6020 60W photovoltaic solar panel with 20A battery can be installed in any location, even in isolated places where a stable power source is lacking. The built-in 20A battery ensures the operation of a surveillance camera* for up to 60 hours.

The monocrystalline solar panel with a maximum power of 60W quickly charges the battery. The battery charge level is indicated by the central LED on the metal mounting bracket. When the battery is charged below 25%, the LED turns red and flashes. When the battery is fully charged, the LED turns green and remains constantly lit. The solar panel should be installed in an area that ensures the best possible exposure to the sun, oriented towards S or SW.

* surveillance camera not included

Versatile pole or wall mounting

The solar panel is equipped with a versatile and multifunctional mounting bracket with accessories for wall mounting or for mounting on a high pole.

The support for the surveillance camera is also multifunctional, having several types of mounting for as many surveillance camera models as possible.

Adjustable angle and direction

For optimal operation and for the most efficient capture of solar radiation, correct adjustment of the panel angle and direction according to the cardinal points is necessary.

General description

PNI IP840 is a high-performance surveillance camera, designed for both indoor and outdoor use. The device is equipped with a 1/2.7″ CMOS sensor and a resolution of 8 MP (4K), transmits the main stream at 3840 × 2160 @12 fps and supports microSD up to 256 GB. The housing benefits from IP65 protection, which makes it weatherproof.

Installation and connectivity

For installation, the device must be powered by a 12 V / 1 A adapter, and the microSD card slot is located under a sealed protective cover, which must be closed tightly to ensure moisture resistance. Connection to the network can be done via WiFi (2.4 GHz) or RJ45 cable, and the dedicated application allows adding the camera by scanning a QR code or adding it manually.

Software and monitoring functionalities

The system supports H.265X video compression (H.264+/H.264 compatible), two-way communication (built-in microphone and speaker), and dual lighting (infrared LED + white LED). Functions include motion detection, human detection, and motion tracking; the user can configure the sensitivity, recording mode (motion detection or continuous 24h), and alarm notifications.

Advanced settings and maintenance

In the preview interface, you can adjust the lighting mode (IR only, white only or both), camera rotation. Note: motion detection and motion tracking cannot be enabled simultaneously.