PIR PNH SafeHouse HS003LR wireless motion sensor for wireless alarm systems

Indoor motion detection

The PNI SafeHouse HS003LR sensor has the role of detecting movement in the protected space and transmitting an alarm signal to a burglary warning system. It can only be used indoors, because many false alarms can occur outdoors.

Wireless communication

PNI SafeHouse HS003LR is very easy to use and install because it does not require any cables and is compatible with PNI wireless alarm systems. Among them we mention:

• PNI SafeHouse HS550
• PNI SafeHouse HS600
• PNI SafeHouse HS650
• PNI SafeHome PT700
• PNI SafeHouse HS007LR wireless outdoor siren.

They use wireless communication with 433 MHz frequency signals. The communication distance between the two units can be up to 100 meters without obstacles.

Increased autonomy

The motion sensor is powered by three 1.5V type AA (LR6) batteries that give it up to 1 year of autonomy. However, it is recommended to test the operation of the detector every few months.

Installation

You can mount the detector on the wall using a double-sided adhesive tape or by fixing it with screws on a fixed support. The recommended height for mounting the detector is 2-2.2 m from the floor.

To pair with a wireless alarm system , press the pairing button on the back of the sensor to send a signal to the central unit.

Attention, all other accessories must be closed (OFF) when pairing a new component.