PNI 602 wired motion detector and built-in broken glass detector for PNI 205 alarm
For an easier installation and a more efficient positioning, the product can be attached to the mounting bracket PNI RA93 (optional accessory not included in the package) with which you can mount the product on the corner, ceiling, or inclined plane.
The detector is small in size, suitable for hard to reach places or in open spaces, being able to monitor entrance halls, stairwell, garages, rooms, doors, etc.
Radius of detection
The detector has an detection radius of 11 meters for the infrared motion sensor, and for the detection window, a radius of 8 meters is broken perpendicular to the sensor, respectively 6 meters at an angle of 45 °.
Broken glass detector
It has the possibility of recognizing the sounds produced by breaking a window separated by the intrusions that activate the motion sensor. Based on voice recognition technologies, it has a very low rate of false alarms given by surrounding sounds.
The detector is equipped with 3 LEDs. Green LED - low frequency vibration indicator. Yellow LED - high frequency vibration indicator. The red LED - indicator of human intrusion. If the green LED lights up then the yellow LED will trigger a broken glass alarm. When the red light comes on, an burglar alarm.
|Accessory type||Motion detector|
|Features motion detector|
|Immunity to false alarms||Yes|
|Automatic temperature compensation||Yes|
|With broken glass sensor||Yes|
|Possibility to adjust sensitivity||Yes|
|Electromagnetic interference immunity||Yes|
|LED jumper on / off||Yes|
|Installation height||2.1 - 2.4 m|
|Supply voltage||9 V dc - 16 V dc|
|Current absorbed||20 mA at 12 V dc|
|dimensions||128 x 64 x 40 mm|
|Operating Temperature||- 10 ° C - + 50 ° C|
|Mounting type||On the ceiling / in the corner / on the wall|
|Maximum detection distance||8 m broken glass detector, 11 m PIR|
|The package contains|
|Instructions for use||Yes|