CB Antenna package PNI led 2000 length 90 cm and mounting bracket on PNI T941 trunk
PNI-LED2000 - CB antenna PNI led 2000 length 90 cm, 26-28 MHz, compatible with PL259 plug, illuminates during emission
LED coilPNI LED 2000 brings an innovative element to the field of CB antennas: the coil of the antenna lights up when the station is broadcasting. The higher the emission power, the higher the luminous intensity of the LED. | |
| performancesThe performance of the PNI LED 2000 antenna is closely related to the technical characteristics that the antenna has in ideal conditions of installation and use: SWR < 1.2:1, maximum applied power 500 W, impedance 52 Ohms, stainless steel, etc. |
Communication distanceCommunication distance is another decisive factor when it comes to choosing a CB antenna. Thus, the maximum communication distance of 10 km is achieved in ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as hills, mountains, buildings can reduce this distance. | |
| LengthThe length of the antenna is another important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range of action. PNI LED 2000 has a length of 90 cm (coil+spike). |
Necessary accessoriesTo be able to use the PNI LED 2000 antenna you need: - a PL magnetic base with a long enough cable for mounting the antenna on the car dome and a PL259 plug for connecting the antenna to the CB station. - or a fixed support mounted on a car / truck with a mount and connection cable to the station, such as the PNI T601 connection cable. | |
PNI-T941 - Support for mounting the PNI T941 antenna on the trunk - includes 5m cable
Compatibility | |
The PNI T941 support can be used for mounting in a fixed position a PL type antenna, similar to the one in the attached image. |
|
Cable length | |
| The length of the cable is 5m, thus allowing you to mount the antenna on the trunk of the vehicle and still be able to make the connection with the CB radio station. |
Cable | |
The cable used is of very good quality RG58 coaxial type with maximum performance in terms of emission and reception. |
|
Video presentation |
|
CB PNI LED 2000 antenna with SO 239 thread, length 90 cm, 26 28 MHz |
PNI-LED2000 - PNI LED 2000 CB antenna with SO-239 thread, length 90 cm, 26-28 MHz, 500 Watt, illuminates during transmission | |
|---|---|
| Product identification | |
| Product code | PNI-LED2000 |
| Work tape | ? B |
| Product color (spike) | Silver |
| General characteristics | |
| Working frequency | 26 - 28 Mhz |
| Maximum power applied | 500W |
| Minimum SWR in the center of the band | less than 1.2:1 |
| Length | Spike length: 750 mm Antenna length: 900 mm |
| Impedance | 50 Ohms |
| Material | Stainless steel |
| Connector type | PL |
| Weight | 337 g |
| size | 44x44x900 mm |
| Polarization | vertically |
| Operating temperature | -26°C ~ +80°C |
| The package contains | |
| Radio station antenna | Yes |
PNI-T941 - Support for mounting the PNI T941 antenna on the trunk - includes 5m cable | |
|---|---|
| Product identification | |
| Code | PNI-T941 |
| General characteristics | |
| Material | Stainless steel |
| Support type | Fixed, on the body |
| Station connection plug | PL259 |
| Color | Silver |
| Compatible antenna | With thread |
| size | 2 mm |
| The package contains | |
| Support for holding the antenna | Yes |
| Cable | 5m RG58 |
| Plug PL259 | Yes |
FAST SHIPPING
You'll have your ordered products in just a few days.
MONEY BACK GUARANTEE
If you decide to return your products, you will get all your money back.
ONLINE SUPPORT 24/7
Contact us and we will answer to all your questions about orders, returns or warranty.
